• State Not Answered
  • Locked Locked
  • Replies 11 replies
  • Subscribers 22 subscribers
  • Views 10993 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to obtiain ST-LINKIII-KEIL.dll?

J T

Would anyone point me in the right direction?

I am looking to obtain the ST-LINKIII-KEIL.dll.
I am currently using microVision 5.15 and it's set as the Target DLL, but
there is no such dll. There is a ST-LINKIII-KEIL_SWO.dll however, but this
isn't the one.

Your help is much appreciated.

Parents
  • 0 in reply to J T

    I just had this same issue with a STM32373C-EVAL board.

    ST came through with a fix:

    1- Open the project options.
    2- Select the Debug tab.
    3- Select ST-Link as debug hardware.
    4- Click on Settings
    5- Click OK on the Target Driver Setup form.
    6- Select the Utilities tab.
    7- Check Use Debug Driver.
    8- Click OK.

    - it worked!

Reply
  • 0 in reply to J T

    I just had this same issue with a STM32373C-EVAL board.

    ST came through with a fix:

    1- Open the project options.
    2- Select the Debug tab.
    3- Select ST-Link as debug hardware.
    4- Click on Settings
    5- Click OK on the Target Driver Setup form.
    6- Select the Utilities tab.
    7- Check Use Debug Driver.
    8- Click OK.

    - it worked!

Children
No data