This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

read messages uisng 89E516RD2

hi all,
i need a small help from you all...
i am trying to interface GSM module with 89E516RD2 microcontroller. and receive messages and display the content of message to the LCD.. i have written a basic code to test it.... but the things are not working proper...
can anybody please let me know where the mistake is...

#include<P89V51Rx2.h>

sbit LCD_en=P0^1;
sbit LCD_rs=P0^0;

#define LCD_DELAY 800 /* Delay for 1 ms */
#define lcdclear() LCD_command(0x1)        /* Clear display LCD */
#define LCD_origin() LCD_command(0x2)      /* Set to origin LCD */
#define lcdrow1() LCD_command(0x80)        /* Begin at Line 1 */
#define lcdrow2() LCD_command(0xC0)        /* Begin at Line 2 */
#define lcdrow3() LCD_command(0x94)        /* Begin at Line 3 */
#define lcdrow4() LCD_command(0xD4)        /* Begin at Line 4 */
#define Shiftcursorleft() LDC_command(0x04)

void LCD_delay(unsigned char ms);
void LCD_enable();
void LCD_command(unsigned char command);
void LCD_putc(unsigned char ascii);
void LCD_puts(unsigned char *lcd_string);
void LCD_init();

void uartinit();
void cmd(unsigned char cd);
void lcd_datawrt(unsigned char *msg);
unsigned char getdat(void);
void dat(unsigned char dt);
void delay (unsigned int t);

void main()
{

unsigned char i,msg[50];

uartinit();
LCD_init();

while(1)
{
lcdrow1();
LCD_puts("WAITING FOR MSG");//wait
while((getdat())!=':');
while((getdat())!='+');
while(getdat()!='\n');
for(i=0;i<20;i++)
{
msg[i]=getdat();
if(msg[i]=='\r')
break;
}
msg[i]='\0';
lcdrow1();
LCD_puts(msg);//wait
}
}

void uartinit(void)     //uart initialising
{
TMOD=0x20;
TH1=0x0FD;//9600 baud rate
SCON=0x50;
TR1=1;
}
unsigned char getdat(void)      //receive gps data serially
{
unsigned char a;
while(RI==0);
a=SBUF;
RI=0;
return(a);
}

void LCD_delay(unsigned char ms)
{
      unsigned char n;
      unsigned int i;
      for (n=0; n<ms; n++)
      {
              for (i=0; i<LCD_DELAY; i++); /* For 1 ms */
      }

}

void LCD_enable()
{
    LCD_en = 0; /* Clear bit P2.4 */
    LCD_delay(1);
    LCD_en = 1; /* Set bit P2.4 */
}

void LCD_command(unsigned char command)
{
    LCD_rs = 0; /* Clear bit P2.5 */
    P1 = (P1 & 0xF0)|((command>>4) & 0x0F);
    LCD_enable();
    P1 = (P1 & 0xF0)|(command & 0x0F);
    LCD_enable();
    LCD_delay(1);
}

void LCD_putc(unsigned char ascii)
{
    LCD_rs = 1; /* Set bit P2.5 */
    P1 = (P1 & 0xF0)|((ascii>>4) & 0x0F);
    LCD_enable();
    P1 = (P1 & 0xF0)|(ascii & 0x0F);
    LCD_enable();
    LCD_delay(1);
}

void LCD_puts(unsigned char *lcd_string)
{
      while (*lcd_string)
      {
              LCD_putc(*lcd_string++);
      }
}

void LCD_init()
{
    LCD_en=1;       /* Set bit P2.4 */
    LCD_rs=0;           /* Clear bit P2.5 */
    LCD_command(0x33);
    LCD_command(0x32);
    LCD_command(0x28);
    LCD_command(0x0C);
    LCD_command(0x06);
    LCD_command(0x01); /* Clear */
    LCD_delay(256);
}

Parents Reply Children