how to display a string from stm32l053r8 nucleo using cube libraries in keilv5 (via USB to virtual com port) **************************************** code:
if( HAL_ADC_Start(&hadc) != HAL_OK) return 0; if (HAL_ADC_Start_DMA(&hadc, (uint32_t*)ADC1ConvertedValues, 2048) != HAL_OK) // return 0; temp=HAL_ADC_GetValue ( &hadc );
need to display the temp value through usb in virtual com port (teraterm)
http://www.keil.com/support/man/docs/gsac/gsac_retargetcortex.htm
my.st.com/.../Flat.aspx