Hi I have made a header board for STM32L152VD after every restart it takes few seconds for the board to start running. I use HSI clock. what do you think the problem is?
-> after power on, the LED starts flashing rapidly for few seconds (between 2 to 10 seconds) then LED becomes steadily on.
After this software modification, the few seconds (between 2 to 10 seconds) becomes a fixed number, let's say at most 5 seconds.
Dear John Thanks for your advise. I found that my problem is from the firmware since I tried with earlier versions of the firmware and modified it to new version. Now this problem has disappeared. I am trying to find out what are the differences that has made this problem.
Hamed Adldoost Posted 29-Jun-2015 16:30 GMT I used the same program to run on STM32L152RC discovery board but I had no problem.
So, it was not the same program?