• State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 21 subscribers
  • Views 1293 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

USB Hub controller

sagar salunkhe

Hi,

I am using a TM4c123 series controllers with 1 USB host port. Now I am using the same port using the a USB switch to use the keyboard and pendrive. But i want to use them both without switching. I guess this is possible if a USB HUB controller with 2 or 3 downstream ports is available. So how should go about it, are there any controllers which such capabilities available.

Regards

Sanket

Parents
  • 0 in reply to Chinzei Tsuneo

    Hi,

    I am newbie to USB protocol.I have read about basic working of USB, how it works, descriptors,
    endpoints and other related things.
    I have now taken a sample code for understanding how USB works. I am using the stellaries USB stack and the MSC example.
    In the stack there is a interrupt handler USB0HostIntHandler which is called continuously which in turn calls other handlers according to ulStatus.
    According to my reading USB is a polling mechanism.I am not understanding how the above mentioned handler is called continuously, even if there is no change on D+ and D- lines.
    This is really important for me to understand as it seems everything starts from here in the USB stack.

    Regards
    Rajat

Reply
  • 0 in reply to Chinzei Tsuneo

    Hi,

    I am newbie to USB protocol.I have read about basic working of USB, how it works, descriptors,
    endpoints and other related things.
    I have now taken a sample code for understanding how USB works. I am using the stellaries USB stack and the MSC example.
    In the stack there is a interrupt handler USB0HostIntHandler which is called continuously which in turn calls other handlers according to ulStatus.
    According to my reading USB is a polling mechanism.I am not understanding how the above mentioned handler is called continuously, even if there is no change on D+ and D- lines.
    This is really important for me to understand as it seems everything starts from here in the USB stack.

    Regards
    Rajat

Children
No data