• State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 22 subscribers
  • Views 1311 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

MDK-5 free and STLINK/V2, possible ?

fab fablab

Hello,
i would like to start with STM32F2 microcontroler.
several people here said the KEIL MDK5 is very good, so to begin i wish to install this

IDE + COMPILER : MDK5, it seems to be an IDE named microvision and a compiler named MDK5.

the hardware to debug: i'm not sure, is it possible to use the STLINK/V2 ?

the MDK5 exist as free for a lite release, is the limitation is only a size of code or is there
a complicate mecanism with a time limited ?

Can i use MDK5 with the STLINK/V2 on the free MDK release ?

Parents
  • 0 in reply to Westonsupermare Pier

    Thank you for your help.

    To start with ARM stm-32 i will use the MDK-5 lite edition and the STLINK/V2 debugger.
    For the Target the NUCLEO boards seems very cheap !!
    About the programming i need only basic,
    for example
    the C include header to use the SPI ou I2C or GPIO.
    i don't need for the moment of big library like USB/ETHERNET.

    please if someone see an error/mistake in this configuration line let me know.

Reply
  • 0 in reply to Westonsupermare Pier

    Thank you for your help.

    To start with ARM stm-32 i will use the MDK-5 lite edition and the STLINK/V2 debugger.
    For the Target the NUCLEO boards seems very cheap !!
    About the programming i need only basic,
    for example
    the C include header to use the SPI ou I2C or GPIO.
    i don't need for the moment of big library like USB/ETHERNET.

    please if someone see an error/mistake in this configuration line let me know.

Children
No data