Hi all
I am evaluating 7-days license for Keil-MDK Pro for Kinetis. I have a TWR-K60F120M tower Kit and I was trying to set up a USB CDC device on that board, with a simple echo program.
But when I try to select Software Components, I add USB Core and then USB Device set to 1, I receive an error saying "require 2.00:CMSIS Driver:USB Device".
But there is not such Driver available! The list of CMSIS Drivers available is just Ethernet, Ethernet PHY, Flash, NAND and USART. By the way, similar problem when I add File System based on Memory Card: SPI and MCI Drivers are missing. And for Ethernet, SPI
Does this mean that if I pay the more than 7000 euros of full license, I can't use this components? MDK-pro version is supposed to include some middleware like USB, Network, FileSystem and Graphics, but..... it seems some of them are not really usable!
Dear Ralf, Reinhard
Thanks to both of you for your information.
As you suggest, I will take a look to K64F examples based on Freedom Development Platform and will use them as starting point. I will try to make some porting to TWR-K70F120 (my mistake, this is the final platform and not K60, but they are quite similar) to evaluate the difficulty of this task, in order to take final decision.
It's also good to know that maybe this year new CMSIS Drivers for Kinetis could be available, or planned!