We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Is it possible for me to send a C file over a UART connection to an LPC1114 mcu? The C file has configurations for the mcu, if it is possible how can I do so using C# in Visual Studio.
I'm glad I was able to help you realize and refine what you need to learn to implement your goal.
Back in the day, I didn't know what I was doing either.
I had searched high and low to find a "pull-up resistor" because I thought it was a different component than a regular resistor.
Eventually, I asked an engineer and he explained it. I felt like an idiot. Feeling like an idiot is better than not asking at all.
--Cpt. Vince Foster 2nd Cannon Place Fort Marcy Park, VA
Feeling like an idiot is better than not asking at all.
Unfortunately there are too many who don't do this, thinking it's better to become a consultant.
Some people ask - but lots of people gravely fails to supply enough information that anyone can answer. And the (often total) lack of information in the questions indicates the lack of thought spent before asking the questions.
So very few questions are bad questions (unless they are constantly repeated). But the way the questions are asked tends to quickly separate the fools from people who wants to learn.
You can take a look at the examples provided by NXP
www.lpcware.com/.../sample-code-bundle-lpc11uxx-peripherals-using-keils-mdk-arm-0
Forgot to say the USART example uses Interrupt
www2.keil.com/.../learn
http://www.keil.com/support/man/docs/gsac/
http://www.keil.com/support/man/docs/mdk_gs/
http://www.keil.com/books/
http://www.keil.com/support/
http://infocentre.arm.com