• State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 22 subscribers
  • Views 1359 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

LPC-Link-2 supportability for ETM in Keil

Anji Reddy

I am using LPC-Link-2 with Segger's J-link image. It is working great.But ETM is not detecting in Keil(uV4/uV5). But LPC-Link-2 is ETM fitted. Please help me to use this feature. I have connected CPU to 20pin trace port of LPC-Link2.

Parents
  • 0 Arm Employee Badge

    Hello Venkata,

    without knowing your HW and SW setup, it it not easy to answer. Please search the uVision Help: Help --> uVision Help --> Search --> enter "ETM" --> J-Link/J-Trace User's Guide: NXP LPC17xx Devices. This has a section "Enable 4-Pin Trace (ETM)". Most probably you are missing the INI file.

    Kind regards,

    Christopher

Reply
  • 0 Arm Employee Badge

    Hello Venkata,

    without knowing your HW and SW setup, it it not easy to answer. Please search the uVision Help: Help --> uVision Help --> Search --> enter "ETM" --> J-Link/J-Trace User's Guide: NXP LPC17xx Devices. This has a section "Enable 4-Pin Trace (ETM)". Most probably you are missing the INI file.

    Kind regards,

    Christopher

Children
No data