We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hello,
I hope someone can help me with this, I'm using a Siemens TC35 GSM modem and connecting it via USB to Serial converter to a laptop, it works fine and responds to the AT commands when not loaded with a SIM card, but, as soon as I add the SIM card, the status LED blinks for 5 or 6 times then goes OFF and the modem stops responding to any commands.
thank you
A GSM radio is likely to pull several amps, so it won't be drawing that from the USB
it works! thanks , it turned out that the power supply wasn't supplying enough current, replaced it with one that can supply 1A and all works fine, thank you :)