hi, i'm using RIDE-IDE simulator for generation of Pulse Width Modulation signals using Philips microcontroller 87LPC768. i have made a program for it but unable to visualise the result on simulator. how can i view the simulated result at different port pins. suggestions are cardially invited. with best regards santosh agrahari R & D Engineer
i have both simulators kiel-IDE & RIDE-IDE. what is the process to view the simulated result of pwm for 87LPC768 in kiel's platform? thanks for communication. santosh agrahari
Hi, it is with the Keil µVision2 and my scope.dll possible to show the PWM signal. You can download the scope from the homepage http://www.c51.de part µVision2 DLLs.
All simulated peripherals are listed in the Peripherals menu. Open this menu and select the peripheral to view its dialog. The PWM outputs hi and lo values on the port pins, so, you should watch the port pins to see the PWM output. Open the Peripherals menu and select the proper output port. For a list of all simulated peripherals as well as descriptions of the dialogs and VTREGs... http://www.keil.com/dd/chip/3206.htm Note that we have just begun integrating this documentation with the device database and not everything is complete. Jon
hi santosh u will surprise to see this mail. actually i have made a agrahari group and i want u to register there.and also tell where u r working. i m a scientist in drdo posted at dehradun.
"u will ... i have ... i want u ... where u r working i m ..." "i m a scientist" Well grow up and stop writing like a 12 year old!