We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
I have a NGX1830 with a Keil ULINK-ME [ULA-0006B]. To use the Keil LINK-ME with lpcXpresso, I believe I have to upgrade the firmware. I found the Firmware Upgrade tool here:
http://www.keil.com/support/man/docs/ulink2/ulink2_fw_upgrade.htm
Any time I execute it all I get is: UL2_Upgrade_v201.exe 1221826 Error: invalid serial number!
Out of frustration I used UL2_EraseFW.exe. After selecting the device it successfully erased the FW. But upgrading still doesn't work.
Any advice how this can be done?
Mat
Hello Mat, thank you for your feedback and suggestions!
Yet the ULINK family is to be used in combination with uVision only! This way the complete set of functionality is visually summarized and supported!
As supporting CMSIS-DAP we may consider offering an external tool with adequate functionality! A corresponding request to our Engineering Team is created already!
Best regards, Ralf