• State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 22 subscribers
  • Views 6375 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

THE SELECTED SERIAL INTERFACE IS EITHER NOT INSTALED

Hector Bo

Hi all, I have the problem that I've exposed in the tittle. Once compiled when i want to start a debug session i can't do it because of the error: THE SELECTED SERIAL INTERFACE IS EITHER NOT INSTALED.

I don't know what can I do to fix this... I tried to change the port but the error still apears.

What can I do? I work on a INTEL - 8xC251TA

Parents
  • 0 in reply to Westonsupermare Pier

    For USB-to-serial adapters without a serial number, Windows will instead remember USB port + ID of the USB controller chip.

    So the same adapter connected to four different USB ports is suddenly remembered as four discrete serial ports, and four COMx: names consumed.

    So USB adapters without a serial number are best sent directly in the waste basket (or properly turn over for recycling).

Reply
  • 0 in reply to Westonsupermare Pier

    For USB-to-serial adapters without a serial number, Windows will instead remember USB port + ID of the USB controller chip.

    So the same adapter connected to four different USB ports is suddenly remembered as four discrete serial ports, and four COMx: names consumed.

    So USB adapters without a serial number are best sent directly in the waste basket (or properly turn over for recycling).

Children
No data