• State Not Answered
  • Locked Locked
  • Replies 28 replies
  • Subscribers 22 subscribers
  • Views 6160 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

JUMP Problem when using RTX RTOS

LOST ISLAND

Hi all ,

Using Uvision4 & LPC1768 & RTX RTOS ,
I want to jump to 0x10000 of the flash.
Before running RTX , there is no problem but after using os_sys_init(APP_TaskStart) , when trying to jump , there is a hardfault . How could I jump while RTX is running ?

By the way , Is there a way to disable RTX ?

Parents
  • 0 in reply to ImPer Westermark

    Are your boot loader _really_ so advanced that it needs to run an RTOS?
    I can solve this problem by resetting the system but I need to jump from the application to the bootloader for reprogramming command again and the application program is in RTX OS too .
    So I need to jump again .
    Apart from that the jump problem through RTX must be solved for my future projects .

Reply
  • 0 in reply to ImPer Westermark

    Are your boot loader _really_ so advanced that it needs to run an RTOS?
    I can solve this problem by resetting the system but I need to jump from the application to the bootloader for reprogramming command again and the application program is in RTX OS too .
    So I need to jump again .
    Apart from that the jump problem through RTX must be solved for my future projects .

Children
No data