We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hi All, I am not an expert on ARM yet but an average guy for uC.
I am trying to get hands on with LPC2148 and plan to use it in next project.
One wonderful thing that I came across (I come form a background where we use 8051/mega16 uC) is USB IAP. So without any UART/Serial cable, I can flash program just by using USB cable.
Did some changes like 1. generating bin file (using fromelf --bin ....) and 2. changing IROM1 from 0x0 to 0x2000
to make program work with IAP.
I tasted some program and those worked very well.
But the issue is arising when I try to use Timer0 interrupt. I see controller getting stuck somewhere just after 1st int.
I checked with "Use Memory Layout with Target Dialog" selected and de-selected both. Nothing worked.
This has something to do with vector table but I am not able to make out what?
Any help on this would be appreciated.
Remember, I just made 3 above mentioned changes after creating new project. If there is anything else, please let me know.
LPC21xx / LPC23xx -> ARM7 -> VIC LPC17xx (LPC13xx?) -> ARM Cortex-M -> NVIC
ARM7 is very different from Cortex-M; and due to the foundry process etc, Cortex-M might be cheaper than ARM7. But of course, different projects have different considerations, LPC2148 might still be the best choice for your projects. (When will NXP terminate LPC21xx?)