We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Dear All Expert,
I am thinking of programming a PIC MCU for my application as it uses 3V supply which can be power up with 2xAAA batteries. I am using Keil C uVision4 and therefore would like to know any user of PIC had already written the assoicated SFR in a <PIC.h> file. Is it possible to provide me with this file as I am totally new to PIC. Should you have a simple interrupt enabled routine and go_to_sleep routine, it will be great if you can share.
My application need to be low power during sleep and will only wake up through external interrupt. I need 4 external interrupts and a RS232 serial communication for my PIC and DIL package is preferred. Anyone had any recommendation on the model number to use?
Thanks a lot for all your advise. Have a good day ahead.
Hi Erik, I am familiar with one of Atmel chip also but running at 5V also. U happen to know any Atmel MCU that run at 3V and have low sleep current with serial port and 2 to 4 interrupts.
happen to know any Atmel MCU that run at 3V and have low sleep current with serial port and 2 to 4 interrupts No, I do not use Arghmel. LOOK AT SILABS
Erik