• State Not Answered
  • Locked Locked
  • Replies 11 replies
  • Subscribers 22 subscribers
  • Views 1879 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

cryptic message "Error: Flash Download failed ...

²erik malund

cryptic message "Error: Flash Download failed - "Cortex-M3"

I am using the STM32f103 and another project loads just fine on the same board.

The "informative" message above does not give me anything to hunt for.

anyone know what actually causes the above?

Erik

PS will cross post at ST

Parents
  • 0 in reply to ²erik malund

    had the "Additional information" been in the logical place (the build output log) I would have seen it.

    How is it particularly logical for debugger problems to show up in the build output window? And yes, flashing the code onto a device really is part of debugging more than it is one of of building.

    There's a reason uVision has always maintained two separate child window layouts, one for edit/build mode, the other for debug mode. You really do need rather wildly different sets of things on the screen in both situations. The build output window shouldn't even be visible when the flash problem is triggered, because by that time you're in debug mode.

Reply
  • 0 in reply to ²erik malund

    had the "Additional information" been in the logical place (the build output log) I would have seen it.

    How is it particularly logical for debugger problems to show up in the build output window? And yes, flashing the code onto a device really is part of debugging more than it is one of of building.

    There's a reason uVision has always maintained two separate child window layouts, one for edit/build mode, the other for debug mode. You really do need rather wildly different sets of things on the screen in both situations. The build output window shouldn't even be visible when the flash problem is triggered, because by that time you're in debug mode.

Children