• State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 22 subscribers
  • Views 1274 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IDE linux compatible to debug microcontroller firmware

Nid Ziz

Hi,there, I'm a starting programmer and a Linux amateur. I'm orienting to be a completely Linux user. I used Keil uvision when I used MS-OS. Please advice me of a mature software to use in debugging my firmwares.

Thank you in advance!

Parents
  • 0 in reply to ImPer Westermark

    Hello, again,

    I'm working on an Opensuse 11.0-i586 operating system, AMD -64bit processor, in a laptop configuation. the operating system was successfully installed as I probed different softs on it. In my low level fast app, I intend to program an ARM cortex M3, or 4 I didn't make my final choice yet.

    The programming process topology I used to work with can be concluded as follows:

    Intl+MSWin+Softpackage----->> External CPU burner ----->> and My breadboard,

    So I just wish to know if there is a similar topology to use in Linux,
    I'd appreciate any other suggestions, or any enlightening.

    Thanks,

Reply
  • 0 in reply to ImPer Westermark

    Hello, again,

    I'm working on an Opensuse 11.0-i586 operating system, AMD -64bit processor, in a laptop configuation. the operating system was successfully installed as I probed different softs on it. In my low level fast app, I intend to program an ARM cortex M3, or 4 I didn't make my final choice yet.

    The programming process topology I used to work with can be concluded as follows:

    Intl+MSWin+Softpackage----->> External CPU burner ----->> and My breadboard,

    So I just wish to know if there is a similar topology to use in Linux,
    I'd appreciate any other suggestions, or any enlightening.

    Thanks,

Children
No data