• State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 22 subscribers
  • Views 1048 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

how to make work usb and pit interrupt

mrmz mrmz

Hello,

i need to have at same time turned on pit interrupt and usb interrupt. When i use only one of it it works good. But when both interrupts are turn on the pit interrupt works good but usb stops during enumeration process. I work with at91sam7x and use atmel's kod for mass storage device.

Thanks in advance

Parents
  • 0 in reply to ImPer Westermark

    At the end of servis routine in both handlers i set AIC_eoicr but it gives no effect. Also i made an experiment and cleard both handler function (they were empty inside) and it gives no change. Is it possible that pit(system int) and usb (as mass storage divice) int when wokrs simultaneously cause no enter to main loop?

Reply
  • 0 in reply to ImPer Westermark

    At the end of servis routine in both handlers i set AIC_eoicr but it gives no effect. Also i made an experiment and cleard both handler function (they were empty inside) and it gives no change. Is it possible that pit(system int) and usb (as mass storage divice) int when wokrs simultaneously cause no enter to main loop?

Children
No data