Daer All,
I have purchased ARM STM32F407VGT6 development boaer
Now I need to create a project to blink LED using uVission or IAR IDE's
It would be much appreciated if some one can help me to crate project step by step
Thanks in advance
Dear All I create a project using keil uVision 4 and fond following error after compiled
Please advice to solve this problem
Error Rebuild target 'Target 1' assembling startup_stm32f4xx.s... compiling main.c... main.c(1): error: #5: cannot open source input file "stm32f4xx_lib.h": No such file or directory compiling Retarget.c... Target not created
#include <stm32f4xx_lib.h> // STM32F10x Library Definitions /*------------------------------------------------------------------------------ wait - delay LED flashes *------------------------------------------------------------------------------*/ void wait(){ unsigned int j = 300000; // define counter while(j--); // count down } /*------------------------------------------------------------------------------ main *------------------------------------------------------------------------------*/ int main(void) { const unsigned int init_leds = 0x1; // define var unsigned int leds = init_leds; // define var while(1){ // loop forever if (leds > 0x8000) leds = init_leds; // reset GPIOA->ODR = (leds); // GPIOA->ODR defined in library leds <<= 0x1; // shift group wait(); // delay } }