Dear All,
I use LPC1778 and try to divide internal flash memory for my handmade bootloader and firmware. And when i set another IROM1 start address for my firmware (for example 0x1000) i see SWD Communication Failure message in window "Building Output". After that i can't debug or update my mcu. Can use only ISP. Why changing IROM1 start address is stopping MCU? What i have to do to run my code from any address? P.S. When i use LPC2367 there is no these problems. P.P.S. My version 4.53
I trying apply RAM_MODE, REMAP commands for my startup file. But doesn't work. With best regards, Vladimir.
Thank you very much! It's really looks better. I add .ini file as initialization file in debug/simulator.
FUNC void Setup (void) { SP = _RDWORD(0x10000000); // Setup Stack Pointer PC = _RDWORD(0x10000004); // Setup Program Counter _WDWORD(0xE000ED08, 0x10000000); // Setup Vector Table Offset Register - VTOR } LOAD %L INCREMENTAL // load the application Setup(); // Setup for Running g, main
And try to run my programm in simulator. But it doesn't work even in simulator... It's stoped in 1st instruction :
0x00000000 0000 MOVS r0,r0
Where is my mistake??? Does anyone knows?
With best regards, Vladimir
I removed .ini file. And created bootloader with next code:
#define NVIC_VectTab_FLASH 0x10000 #define SP_OFFS 0 #define RESET_OFFS 4 int main (void) { //========== NEW BOOTLOADER FOR CORTEX-M3 ================= void (*user_code_entry)(void); register uint32_t MSP __ASM("msp"); SCB->VTOR = NVIC_VectTab_FLASH; user_code_entry = (void (*)(void))(( *((unsigned int *)(NVIC_VectTab_FLASH + RESET_OFFS))) ); MSP = *((unsigned int *)(NVIC_VectTab_FLASH + SP_OFFS)); user_code_entry(); }
And after burning my programm from: 0x10000 address I see next message:
SWD Communication Failure.
Where is my mistake? Please help.
Dear Keil Support! I wrote simple bootloader. And seems it's work. But when i download my firmware(0x10000 address) via button "Download". My bootloader is not start. And i see SWD communication error. But most interesting, that durind downloading it is write some data in 0x300 address. And after that my bootloader is not start. It's possible to fix it?
Hi Vladimir,
I think it would be the best if you directly contact our support team by creating a support request. There you can also upload your code that we can check & discuss it with you.
This forum is a User2User forum, and not regularly monitored by our support team.
BR, /th.