• State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 22 subscribers
  • Views 1874 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

my ocde is not going to main function

siva d

hello,
i have opened LPC4357 controller example project from "C:\Keil\ARM\Boards\Keil\MCB4300\Blinky\".
i cofigured it in simulator mode and when i enter into simulation mode my code is not going to main function instead it is pointing to 0x0 memory location where no code is written..even i configured IROM1 as 0x1A000000 with size 0x8000 (i.e onchip Flash memory)and RAM1 0x10000000 and size 0x8000 correctly but i am unable to execute the code..could any one of you please suggest me should i need to change any thing to run it from main function.please try to help me out from this its really very urgent for me

Thanks in advance

Best regards
Cva

Parents
  • 0 in reply to ImPer Westermark

    i heared that the controller LPC4357 doesn't support simulation mode.to check the results for this controller we must and should have hardware how far is it true?
    after i added .ini file with specified PC also, my program ia not going to main routine instead is it pointing to 0x0 location.

Reply
  • 0 in reply to ImPer Westermark

    i heared that the controller LPC4357 doesn't support simulation mode.to check the results for this controller we must and should have hardware how far is it true?
    after i added .ini file with specified PC also, my program ia not going to main routine instead is it pointing to 0x0 location.

Children
No data