• State Not Answered
  • Locked Locked
  • Replies 16 replies
  • Subscribers 23 subscribers
  • Views 10911 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

a fingerprint verification program

SURABHI VAISHNAV

i want a fingerprint based User Verification Program with It's header file inclusion in Embedded C.
help !

thanks!

Parents
  • 0 in reply to sanjay makwana

    in th project error is there is no. h file

    #include<reg52.h>
    #include<lcd.h>
    #include<serial.h>
    #include<string.h>
    sbit SW = P3^7;
    sbit motor1 = P2^0;
    unsigned char D[20];
    unsigned char i,value;
    bit flag;
    void Disp_Hex(unsigned char);
    void FINGER_FUN_IDT(); // finger
    identification
    void serial(void ) interrupt 4 {
    if (RI)
    { D[i] = SBUF;
    if (i>15){flag=1;}
    else i++;
    } }
    void main()
    { bit scan_flag;
    SConfig();
    scan_flag=0;motor1= 0;
    LCD_Init();
    LCD_Cmd(0x80);
    Disp_Str(" WELCOME ");
    Delay(50);clear();
    LCD_Cmd(0x80);
    Disp_Str(" finger print ");
    LCD_Cmd(0xC0);
    Disp_Str(" BASED PROJECT ");
    Delay(100);
    LCD_Cmd(0x80);
    Disp_Str(" PRESS SWITCH ");
    while(1) // infinite loop
    { LCD_Cmd(0x80);Disp_Str(" PRESS
    SWITCH ");
    if (SW==0) //scanning switch
    { FINGER_FUN_IDT(); //command
    identify function
    EA=1;ES=1;
    Delay(300);
    } if (flag==1)
    { flag=0;
    if (D[12] == 0x00 && D[13] ==
    0x00 && D[14] == 0x00)
    { scan_flag=1;
    LCD_Cmd(0x80);
    Disp_Str(" VALID ");
    LCD_Cmd(0xC0);
    Disp_Str(" PERSON1 ");
    } else if (D[12] == 0x00 && D[13]
    == 0x00 && D[14] == 0x01)
    { scan_flag=1;
    LCD_Cmd(0x80);
    Disp_Str(" VALID ");
    LCD_Cmd(0xC0);
    Disp_Str(" PERSON2 ");
    } else if (D[12] == 0x00 && D[13]
    == 0x00 && D[14] == 0x02)
    { scan_flag=1;
    LCD_Cmd(0x80);
    Disp_Str(" VALID ");
    LCD_Cmd(0xC0);
    Disp_Str(" PERSON3 ");
    } else if (D[12] == 0x02)
    { LCD_Cmd(0xC0);
    Disp_Str("NO F.P ON SENSOR");
    } else if (D[12] == 0x09)
    { LCD_Cmd(0xC0);
    Disp_Str("NO F.Pwere FOUND");
    } EA=ES=0;
    } if (scan_flag==1)
    { Delay(100);
    LCD_Cmd(0x80);
    Disp_Str(" DOOOR OPEN ");
    motor1=0;
    Delay(600);
    LCD_Cmd(0x80);
    Disp_Str(" DOOR CLOSED ");
    motor1=1;
    Delay(600);
    motor1=0;
    } } //infinite loop end
    } // main loop end
    void FINGER_FUN_IDT()
    { Send_Char(0xEF);Send_Char(0x01);
    Send_Char(0xFF);Send_Char
    (0xFF);Send_Char(0xFF);Send_Char
    (0xFF);
    Send_Char(0x01);
    Send_Char(0x00);Send_Char(0x03);
    Send_Char(0x01);
    Send_Char(0x00);Send_Char(0x05);
    }

Reply
  • 0 in reply to sanjay makwana

    in th project error is there is no. h file

    #include<reg52.h>
    #include<lcd.h>
    #include<serial.h>
    #include<string.h>
    sbit SW = P3^7;
    sbit motor1 = P2^0;
    unsigned char D[20];
    unsigned char i,value;
    bit flag;
    void Disp_Hex(unsigned char);
    void FINGER_FUN_IDT(); // finger
    identification
    void serial(void ) interrupt 4 {
    if (RI)
    { D[i] = SBUF;
    if (i>15){flag=1;}
    else i++;
    } }
    void main()
    { bit scan_flag;
    SConfig();
    scan_flag=0;motor1= 0;
    LCD_Init();
    LCD_Cmd(0x80);
    Disp_Str(" WELCOME ");
    Delay(50);clear();
    LCD_Cmd(0x80);
    Disp_Str(" finger print ");
    LCD_Cmd(0xC0);
    Disp_Str(" BASED PROJECT ");
    Delay(100);
    LCD_Cmd(0x80);
    Disp_Str(" PRESS SWITCH ");
    while(1) // infinite loop
    { LCD_Cmd(0x80);Disp_Str(" PRESS
    SWITCH ");
    if (SW==0) //scanning switch
    { FINGER_FUN_IDT(); //command
    identify function
    EA=1;ES=1;
    Delay(300);
    } if (flag==1)
    { flag=0;
    if (D[12] == 0x00 && D[13] ==
    0x00 && D[14] == 0x00)
    { scan_flag=1;
    LCD_Cmd(0x80);
    Disp_Str(" VALID ");
    LCD_Cmd(0xC0);
    Disp_Str(" PERSON1 ");
    } else if (D[12] == 0x00 && D[13]
    == 0x00 && D[14] == 0x01)
    { scan_flag=1;
    LCD_Cmd(0x80);
    Disp_Str(" VALID ");
    LCD_Cmd(0xC0);
    Disp_Str(" PERSON2 ");
    } else if (D[12] == 0x00 && D[13]
    == 0x00 && D[14] == 0x02)
    { scan_flag=1;
    LCD_Cmd(0x80);
    Disp_Str(" VALID ");
    LCD_Cmd(0xC0);
    Disp_Str(" PERSON3 ");
    } else if (D[12] == 0x02)
    { LCD_Cmd(0xC0);
    Disp_Str("NO F.P ON SENSOR");
    } else if (D[12] == 0x09)
    { LCD_Cmd(0xC0);
    Disp_Str("NO F.Pwere FOUND");
    } EA=ES=0;
    } if (scan_flag==1)
    { Delay(100);
    LCD_Cmd(0x80);
    Disp_Str(" DOOOR OPEN ");
    motor1=0;
    Delay(600);
    LCD_Cmd(0x80);
    Disp_Str(" DOOR CLOSED ");
    motor1=1;
    Delay(600);
    motor1=0;
    } } //infinite loop end
    } // main loop end
    void FINGER_FUN_IDT()
    { Send_Char(0xEF);Send_Char(0x01);
    Send_Char(0xFF);Send_Char
    (0xFF);Send_Char(0xFF);Send_Char
    (0xFF);
    Send_Char(0x01);
    Send_Char(0x00);Send_Char(0x03);
    Send_Char(0x01);
    Send_Char(0x00);Send_Char(0x05);
    }

Children
No data