• State Not Answered
  • Locked Locked
  • Replies 33 replies
  • Subscribers 22 subscribers
  • Views 10120 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Setting all 8 breakpoints

Warden Reed

Hi everyone,

I am debugging an application on a STM32F4 in flash with a ULINK.
I read one of the features for the ULINK should be 8 breakpoints, but after the 6th breakpoint I get an error message.
Isn't it possible to use all 8 breakpoints?
Maybe can I use 8 breakpoints with another device?

Can you help me with this?

Warden

Parents
  • 0 Arm Employee Badge in reply to Mats Sporin

    Hello

    I have a slide set from the Cortex-M3 Product Manager that clearly says 8 hardware breakpoints.
    I don't see a place here where I can post the picture...

    BUT ! We could both be correct - this maximum number could have been changed in a later version of CoreSight.....

    I will ask the CoreSight guy and report back here what I find....

    Thanks

    Bob

Reply
  • 0 Arm Employee Badge in reply to Mats Sporin

    Hello

    I have a slide set from the Cortex-M3 Product Manager that clearly says 8 hardware breakpoints.
    I don't see a place here where I can post the picture...

    BUT ! We could both be correct - this maximum number could have been changed in a later version of CoreSight.....

    I will ask the CoreSight guy and report back here what I find....

    Thanks

    Bob

Children
No data