• State Not Answered
  • Locked Locked
  • Replies 11 replies
  • Subscribers 22 subscribers
  • Views 1523 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

LPC2361

Dorin Mitrut

Hello,

can anyone tell me if can I use threads and timers (like in C/C++) on LPC2361 and where can I found some demo/examples/manuals about that?

Thanks

Parents
  • 0 in reply to Andy Neil

    Dear Andrew

    you right. The only way is to make sure that the required time is at most or less than the available time. So you must provide in time escape from any running sequence. But will be harder to program :(. That's why they invented multithreading, that you don't worry about that. No offence, I hope

    Dorin

Reply
  • 0 in reply to Andy Neil

    Dear Andrew

    you right. The only way is to make sure that the required time is at most or less than the available time. So you must provide in time escape from any running sequence. But will be harder to program :(. That's why they invented multithreading, that you don't worry about that. No offence, I hope

    Dorin

Children