lpc23xx uart fault data

Hi , I have uart problem . I want to do ; computer to send data to the mcu(same data) than mcu to pc. Examples

13.12.2012 14:30:08.72 [TX] - 1234567890
13.12.2012 14:30:08.72 [RX] - 1234567890

but I'm having problems receiving data

13.12.2012 14:30:08.72 [TX] - 1234567890
13.12.2012 14:30:08.72 [RX] - 24680

follow code.

Notes: I'm sorry bad english spelling.

 #include "lpc23xx.h"
#include <stdio.h>

typedef unsigned char U8;
typedef unsigned int  U32;

typedef unsigned char  BYTE;
typedef unsigned short WORD;
typedef unsigned long  DWORD;
typedef unsigned int   BOOL;
#define TBUF_SIZE   256      /*** Must be a power of 2 (2,4,8,16,32,64,128,256,512,...) ***/
#define RBUF_SIZE   256      /*** Must be a power of 2 (2,4,8,16,32,64,128,256,512,...) ***/

/*------------------------------------------------------------------------------
------------------------------------------------------------------------------*/
#if TBUF_SIZE < 2
#error TBUF_SIZE is too small.  It must be larger than 1.
#elif ((TBUF_SIZE & (TBUF_SIZE-1)) != 0)
#error TBUF_SIZE must be a power of 2.
#endif

#if RBUF_SIZE < 2
#error RBUF_SIZE is too small.  It must be larger than 1.
#elif ((RBUF_SIZE & (RBUF_SIZE-1)) != 0)
#error RBUF_SIZE must be a power of 2.
#endif



#define __FALSE 0
#define __TRUE  (!__FALSE)

struct buf_st {
  unsigned int in;          /* Next In Index */
  unsigned int out;         /* Next Out Index */
  char buf [256];     /* Buffer */
};

static struct buf_st rbuf = { 0, 0, };
#define SIO_RBUFLEN ((unsigned short)(rbuf.in - rbuf.out))

static struct buf_st tbuf = { 0, 0, };
#define SIO_TBUFLEN ((unsigned short)(tbuf.in - tbuf.out))

static unsigned int tx_restart = 1;   /* NZ if TX restart is required */

static struct buf_st rbuf;
static struct buf_st tbuf;
static unsigned tx_active;






void InitUART0(void)
{     DWORD Fdiv;

          rbuf.in   = 0;
  rbuf.out  = 0;
  tbuf.in   = 0;
  tbuf.out  = 0;
  tx_active = __FALSE;


        PINSEL0 = 0x40000050;
    PINSEL1 = 0x00000001;
    IODIR1 = 0x00000700;
    FIO2DIR = 0x00002010;
   Fdiv = ( 12000000 / 16 ) / 19200 ;   /*baud rate */
          U1DLM = Fdiv / 256;
   U1DLL = Fdiv % 256;




U0FCR = 0x07;
U0LCR = 0x80;
  U0DLM = Fdiv / 256;
   U0DLL = Fdiv % 256;
U0LCR = 0x03;
//U0FDR = (14 << 4) + 4;
U0IER = 0x07;

U1FCR = 0x07;
U1LCR = 0x80;
  U1DLM = Fdiv / 256;
   U1DLL = Fdiv % 256;
U1LCR = 0x03;
//U1FDR = (14 << 4) + 4;
U1IER = 0x07;

}


__irq void UART0_IRQHandler(void) {  volatile char dummy;
  volatile char IIR;
  struct buf_st *p;

  /*------------------------------------------------
  Repeat while there is at least one interrupt source.
  ------------------------------------------------*/
  while (((IIR = U0IIR) & 0x01) == 0) {
     switch (IIR & 0x0E) {
       case 0x06: /* Receive Line Status */
         dummy = U0LSR;  /* Just clear the interrupt source */
        VICVectAddr = 0;                /* Acknowledge Interrupt */

                         break;

       case 0x04: /* Receive Data Available */



                         case 0x0C: /* Character Time-Out */
         p = &rbuf;

         if (((p->in - p->out) & ~(RBUF_SIZE-1)) == 0) {
           p->buf [p->in & (RBUF_SIZE-1)] = U0RBR;
           p->in++;
         }
         break;

       case 0x02: /* THRE Interrupt */
         p = &tbuf;

         if (p->in != p->out) {
           U0THR = p->buf [p->out & (TBUF_SIZE-1)];
           p->out++;
           tx_restart = 0;
         }
         else {
           tx_restart = 1;
         }
         break;

       case 0x00: /* Modem Interrupt */
       //  dummy = U0MSR;  /* Just clear the interrupt source */
         break;

       default:
         break;
     }
  }

  VICVectAddr = 0; /* Acknowledge Interrupt */
}







int com_putchar0 (int c) {
  struct buf_st *p = &tbuf;

  /*------------------------------------------------
  If the buffer is full, return an error value.
  ------------------------------------------------*/
  if (SIO_TBUFLEN >= TBUF_SIZE)
    return (-1);

  /*------------------------------------------------
  Add the data to the transmit buffer.  If the
  transmit interrupt is disabled, then enable it.
  ------------------------------------------------*/
  if (tx_restart)       {
    tx_restart = 0;
    U0THR = c;
  }
  else {
    p->buf [p->in & (TBUF_SIZE - 1)] = c;
    p->in++;
  }

  return (0);
}

/*--------------------------- com_getchar0 -----------------------------------*/

int com_getchar0 (void) {
  struct buf_st *p = &rbuf;

  if (SIO_RBUFLEN == 0)
    return (-1);

  return (p->buf [(p->out++) & (RBUF_SIZE - 1)]);
}


int usart_oku (int *veri) {
  struct buf_st *p = &rbuf;

  if (SIO_RBUFLEN == 0)
    return (-1);
*veri=(p->buf [(p->out++) & (RBUF_SIZE - 1)]);
  return (p->buf [(p->out++) & (RBUF_SIZE - 1)]);


}



/*--------------------------- putStr0--------------------------------------*/

void putStr0(const char *str)
{
    for ( ; str && *str; str++)
      com_putchar0(*str);
}


BOOL com_tx_active (void) {
  /* Return status Transmitter active/not active.         */
  /* When transmit buffer is empty, 'tx_active' is FALSE. */
  return (tx_active);
}

int com_getchar (void)
{
        int c;
        c=com_getchar0();
        return  c;
}


int main(void)
{

  volatile unsigned  i = 0;
  volatile unsigned  k = 0;
    int ver;
 VICVectAddr6 = (unsigned long) UART0_IRQHandler;           /* set interrupt vector 6 */
   VICVectPriority6 = 0 ;           /* default priority is 15 (lowest), can be set between 0-15 */
  VICIntEnable |= (1UL<<6);           /* Enable UART0 Interrupt */

InitUART0();
    for (i = 0; i < 500000U; i++);
putStr0("its ok!\r\n");
while(1)
          {



while (com_getchar0() >= 0)
{   for (i = 0; i < 5000; i++);

                com_putchar0(com_getchar0());
}

//putchar1(getchar1());



}
}