We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Gents;
Not a direct Keil question. I have picked up a project that has 2 serial FRAM (FM25V20-GTR) in the design.
I have read the specs and data sheets. The specman-ship make them sound the greatest thing since the pentode valve.
I would like to know what real world experiences might point to gotchas that I need watch for in terms both of software and hardware.
The design has good reverse termination on the serial lines and the devices have good by-pass decoupling. So I am assuming good SPI program design should make the FRAM devices quite happy.
Yes, I will be using Keil tools in the project.
Any and all comments are welcomed.
Thank you,
Bradford
Hi Erik;
Thanks for the feedback. Especially about the no problems. Yes, wear will be a concern for this application so the original designer seems to have made the correct choice.
I am getting a warm fuzzy feeling the FRAM is what the specs seem to claim.