This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SMVS input 110VDC to 17VAC

i need the help of a real good professional who really is top of the game.

we are trying to perfect the design of our own a SMVS with the requirement input 110VDC, output 17VAC 3A through to a simultaneous phasing of 9.6VAC at 4A in the higher harmonic region (theta 7.3). as you know the control of the SMVS operation is critical in getting the phasing correct. we look at the STELLARIS M4F series and think it can achieve the mass inertial calculations in real time. has one of you guys got any experience of the typical design layout with this processor using Keils RTX?

Parents
  • your comments have just been bluster. nothing but bluster
    and you sole response has been "I REFUSE to state what the acronym stand for"

    Now that you have given up. let us please know what it stands for.

    Erik

    PS An amusing anecdote re acronyms. I once responded to a want ad misinterpreting what PLC stood for. I had then no idea, whatsoever what a Programmable Logic Controller was. They hired me anyhow and I learned to do ladder logic which now is on my resume.

Reply
  • your comments have just been bluster. nothing but bluster
    and you sole response has been "I REFUSE to state what the acronym stand for"

    Now that you have given up. let us please know what it stands for.

    Erik

    PS An amusing anecdote re acronyms. I once responded to a want ad misinterpreting what PLC stood for. I had then no idea, whatsoever what a Programmable Logic Controller was. They hired me anyhow and I learned to do ladder logic which now is on my resume.

Children
No data