We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
i need the help of a real good professional who really is top of the game.
we are trying to perfect the design of our own a SMVS with the requirement input 110VDC, output 17VAC 3A through to a simultaneous phasing of 9.6VAC at 4A in the higher harmonic region (theta 7.3). as you know the control of the SMVS operation is critical in getting the phasing correct. we look at the STELLARIS M4F series and think it can achieve the mass inertial calculations in real time. has one of you guys got any experience of the typical design layout with this processor using Keils RTX?
So show how many references you see on google - that should give you an indication how well-used acronym you have selected...
But there are a huge number of very specific acronyms in use for different designs of PSU, as separate from the general concept of switching power supplies. Some terms are even so specific that they are only used by specific companies.
The generic term would otherwise be SMPS - not SMVS.
it is irrelevant how many references are seen on google.
it is also obvious you cannot help.
And it's obvious you are a ***.
Question is - did it take hard work?
oh dear. looks like a nerve was touched.
fyi i'll let you know that a cross post has found me some help. from someone who is aware of the subject.
Good for you. How about linking when you cross-post? But maybe you don't spend much time caring about wasted time from activating multiple forums to solve your problems? You seem to be that type.