pls help...
i'm working on LPC1114-FBD/301 series
On my board 4 LED's are connected to P0_8, P0_9, P0_10, P0_11.
I'v written a sample code toggle them. Only on 8 and 9 port pin LED's are blinking but on 10 and 11 there state is always on. here is the sample code
/* by default P0_8 and P0_9 pins are GPIO's */ LED_DIR |= BIT(8); LED_DIR |= BIT(9);
/* 9th and 10th pins are not GPIO's on reset */ // i think here some changes required to make them as GPIO's IOCON_SWCLK_PIO0_10 |= 0x1; IOCON_R_PIO0_11 |= 0x1;
LED_DIR |= BIT(10); LED_DIR |= BIT(11);
I am going to continue ignoring your provocations - I honestly don't care what post about me (this post is a rare exception). Just to let you know, that by all means, and, I believe, in the minds of all the regular contributors to this forum, you are behaving like an idiot. Why are you humiliating yourself like this? Give us something positive, for a change. I have a lot of urgent work to do, which is one of the reasons it is exceedingly easy for me to ignore you. I don't care - OK? Feel free to continue if it makes you feel better. I simply have better things to do, and intend not to feed you psychotic behavior. Think about this.