• State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 22 subscribers
  • Views 1408 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Use easyweb with KS8721

Hadi Nasiri

Hi friends
I have designed a training board for LPC2368 and use KS8721BL as PHY.
I wana use Keil EasyWeb for my board but it does not work(I can't PING my board)

This is what I have done:
1- Change "DP83848C_DEF_ADR 0x0100" to "DP83848C_DEF_ADR 0x0001" in EMAC.h
2- Change "DP83848C_ID 0x20005C90" to "DP83848C_ID 0x00221619" in EMAC.h
3- build project
4- write Hex file on flash

Should I do anything else...?

What's the PROBLEM ?

Thank you for your attention

Parents
  • 0

    Should I do anything else...?

    How would we know --- if you, with the full information in your hands, don't?

    What's the PROBLEM ?

    Your hardware's too different from the one that program was written for.

    That, and you have no idea how to represent a technical problem. What exactly did you think "does not work" tells anyone about what's actually going on?

Reply
  • 0

    Should I do anything else...?

    How would we know --- if you, with the full information in your hands, don't?

    What's the PROBLEM ?

    Your hardware's too different from the one that program was written for.

    That, and you have no idea how to represent a technical problem. What exactly did you think "does not work" tells anyone about what's actually going on?

Children
No data