• State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 22 subscribers
  • Views 1806 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Configure keil for some analog input while simulating

Aamir Ali

How to configure keil. Let say I have ADC pin on 89c51 in simulation. Now how to generate some analog signal on it.

Parents
  • 0

    You can manually enter a voltage in the peripherals view, when using the simulator.

    I currently have a bug report open for the XC878, because the simulator doesn't execute the ADC interrupts, but because you're on a different platform I don't expect you'll have similar problems.

Reply
  • 0

    You can manually enter a voltage in the peripherals view, when using the simulator.

    I currently have a bug report open for the XC878, because the simulator doesn't execute the ADC interrupts, but because you're on a different platform I don't expect you'll have similar problems.

Children
No data