We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Dear Sir, I am having a problem with at89s52 on power up. I am doing a project which demands serial communication via serial port. I have gone through one of the threads here, where you had advised one Mr.Bhagirath to use 3-pin rest(MX810). So, I get it that the problem MAY BE in reset button. But, I would also like to share with you the fact that earlier I did not have any arrangement for reset, then it never misbehaved. So, what are the other areas from where this anomaly is rising?
Mr.Malund, I shall not argue that I never believed in proper reset arrangement but thank you, Sir, that you have made me a bliever in it. Sir, the only thing I am asking is that in case after providing the proper reset arrangement, the problem still persists, what should be my next step ?
the only thing I am asking is that in case after providing the proper reset arrangement, the problem still persists, what should be my next step ? with a proper reset supervisor chip, there will be no next step.
Erik