This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

No Algorithm found for address 0x00080000

Hello,

I tried to download to my ADuC7026 example program for DACsine wave.
But when trying this error is generated: No Algorithm found for address 0x00080000.
Should be ok because FLASH/EE is from x0008000 to 0x0008FFFF0

I communicate through Jtag and uC is paired because I can erase it (can't read registers though because 'CPU is running').

Have anyone solved this problem before ?

Thanks,
Bob

Parents

0 Bob Kleid over 13 years ago in reply to Alexan Eramian

Thanks a lot !

It worked. I have though problems now with timeouts... Out of 5 tries only 1 finished with Programming ok. But I'm happy with that.

Once again thanks a lot Alex!
Cancel
Vote up 0 Vote down

Cancel

Reply

0 Bob Kleid over 13 years ago in reply to Alexan Eramian

Thanks a lot !

It worked. I have though problems now with timeouts... Out of 5 tries only 1 finished with Programming ok. But I'm happy with that.

Once again thanks a lot Alex!
Cancel
Vote up 0 Vote down

Cancel

Children

0 Alexan Eramian over 13 years ago in reply to Bob Kleid

You are welcome.

Have you tried with a lower jtag clock frequency?
Or if there is an auto setting for the clock try that and the debugger will find the optimum clock frequency.

Alex
Cancel
Vote up 0 Vote down

Cancel