Hi, Im working with an MCBSTM32E (STM32F103ZE chip) evaluation board and Im trying to create a web server on my board. Because theres no Ethernet controller on board Im using an external WiFi module (RS9110-11-21 from Redpine Signals). Ive configured UART2 as my serial connection to the module. In the Net_Config.c file ive unchecked the Ethernet Network Interface and have enabled the SLIP interface. When I try to compile the code I get the following build output message:
Build target 'STM32 Flash' compiling Net_Config.c... linking... .\Obj\Test.axf: Error: L6218E: Undefined symbol dhcp_vcid (referred from at_dhcp.o). .\Obj\Test.axf: Error: L6218E: Undefined symbol own_hw_adr (referred from at_dhcp.o). Target not created
The serial driver file Serial_STM32x.c is included and modified. Has anyone encountered the same problem?
BTW if I enable the Ethernet interface I dont get the error messages but the program will get stuck in the init_TcpNet() function. (Fatal Error Handler)
Thanks, Chris
Hi! Refering to this problem: linking... .\Obj\Http_demo.axf: Error: L6218E: Undefined symbol dhcp_vcid (referred from at_dhcp.o). Target not created
I just found out that I need to do the following two things to get it work: (1) #define DHCP_ENABLE 0 (2) Do not call the dhcp_disable () function Is it means I can not enable the DHCP function?