• State Not Answered
  • Locked Locked
  • Replies 13 replies
  • Subscribers 22 subscribers
  • Views 8868 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

GPIO as Input Pull Up / Pull Down

JD MD

The reference manula says i can configure the STM32 GPIO as either Input pull-up or as Input-pull-down.

But i do not see any register which configures this. Can anybody clarify this.

Regards,
Jawaad

Parents
  • 0 in reply to Loup Balleyguier

    Easy guys easy… I was not trying to confront nobody...

    My apologies to Andrew. I happen to find the lib after Andrew highlighted it.
    I was just comparing the two styles of ST and recommend my team to use the lib to cover the missing things in STM32_Init.c

    And secondly I mentioned about STM32_Init, so that anybody would correct me if it does support the said feature.

    Your inputs expedited the development process...

    I thank again Andrew and Loup for their support.

Reply
  • 0 in reply to Loup Balleyguier

    Easy guys easy… I was not trying to confront nobody...

    My apologies to Andrew. I happen to find the lib after Andrew highlighted it.
    I was just comparing the two styles of ST and recommend my team to use the lib to cover the missing things in STM32_Init.c

    And secondly I mentioned about STM32_Init, so that anybody would correct me if it does support the said feature.

    Your inputs expedited the development process...

    I thank again Andrew and Loup for their support.

Children