• State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 22 subscribers
  • Views 2132 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

LPC1768 ethernet controlling

james ng

Hi,

I am new to ARM MCUs, I would like to use the lpc1768 for controlling stuffs via the Ethernet. How do i send information/data from the webpage to the MCU for internal processing?

Parents
  • 0 in reply to Andy Neil

    Thank you for your swift response.

    I have some experience working in the PIC 8 and 16bit families. I have no experience in ethernet and active html scripts.

    I am trying to move one of my older project(PIC18 based) which takes commands/outputs via gsm gateway to the ethernet using the lpc1768 cortex-m3.

    Where can I find the best read on such information?\

    Any help would be greatly appreciated!

Reply
  • 0 in reply to Andy Neil

    Thank you for your swift response.

    I have some experience working in the PIC 8 and 16bit families. I have no experience in ethernet and active html scripts.

    I am trying to move one of my older project(PIC18 based) which takes commands/outputs via gsm gateway to the ethernet using the lpc1768 cortex-m3.

    Where can I find the best read on such information?\

    Any help would be greatly appreciated!

Children
No data