For ARM7, A hardware timer is 32-bits, and unsigned int is 32-bits too; For a 16-bits MCU, A hardware timer is 16-bits, and unsigned int is 16-bits too;
So,
t0 = timer_val; while ( ( timer_val - t0 ) < delay_val );
provide a simple and good delay;
Not so sure about, if a cast is needed.
t0 = timer_val; while ( (unsigned int)( timer_val - t0 ) < delay_val );
Just noticed that, due to the integral promotion,
unsigned short t0, t1; ( t1 - t0 ) is a signed int.
It seems that,
unsigned int t0, t1; ( t1 - t0 ) is still an unsigned int.
I noticed this, because I use unsigned short to present a 16-bits timer_val on my X86-PC for testing/simulating purpose, and the result is not what I expected.
You can try, but you might need to change quite a few lines of code in order for it to compile depending how older the lib you have is from the lib you want to upgrade to. I had similar issues with a example running old CMSIS and my implementation using newer, that I tried to mix together. I lost a couple of days before I fixed it.