• State Not Answered
  • Locked Locked
  • Replies 14 replies
  • Subscribers 19 subscribers
  • Views 7633 views
  • Users 0 members are here
Options
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Link a plain binary file into flash using a scatter loading file

BAUMER Electric AG BAUMER Electric AG

Hi all

I would like to link a plain binary file (parameter.bin) to a specific location in the flash using a scatter file.

If i had a compiled object file (parameter.o) file, it would be easy, but that's not the way i want to do it:

LR_ROM_BL   ROM_LOAD_BASE   ROM_BOOTLOADER_SIZE {

    ER_ROM_BL ROM_LOAD_BASE (ROM_BOOTLOADER_SIZE) {  ; load address = execution address
        parameters.o
    }
}

I would like to do it like this:

LR_ROM_BL   ROM_LOAD_BASE   ROM_BOOTLOADER_SIZE {

    ER_ROM_BL ROM_LOAD_BASE (ROM_BOOTLOADER_SIZE) {  ; load address = execution address
        parameter.bin
    }
}

But when I add parameter.bin to my uVision Project as an object file, i get the message:

..\out\basisprojekt_stm32f103neu.axf: error: L6007U: Could not recognize the format of file ..\out\parameter.bin.

And when I dont add Parameter.bin to my uVision Projekt, i get:

..\misc\stm32f103x_md.sct(67): warning: L6314W: No section matches pattern parameter.bin(RO).

Any Idea?
Regards, Martin

0