• State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 22 subscribers
  • Views 1633 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

need to integrate USB host source code with IAR workbench

Mohamed Zuhair

Dear All,

Can you please let me know is USB Host source code available for AT91SAM9263 controller.Also I need to know whether USB host code of KEIL MDK-ARM can be integrated in IAR embedded workbench 6.0 for my development and it should run without any operating system.

So I request you to provide this detail.

Best Regards,
Zuhair

Parents
  • 0

    1) are you really unaware what architecture the AT91SAM9263 is
    2) having worked with both Keil and IAR i would answer your question with "not without difficulty"
    3) it would be highly illegal. The Keil stuff is copyrighted "for use with Keil"
    4) if the manufacturer of you chip does not provide USB host code you should find another chip manufacturer (e.g. ST)

    Erik

Reply
  • 0

    1) are you really unaware what architecture the AT91SAM9263 is
    2) having worked with both Keil and IAR i would answer your question with "not without difficulty"
    3) it would be highly illegal. The Keil stuff is copyrighted "for use with Keil"
    4) if the manufacturer of you chip does not provide USB host code you should find another chip manufacturer (e.g. ST)

    Erik

Children