LPC2378

Your project is built for RAM you have to click on Start Debug Session.

Thank you. With it clearly.
But I only began to work as the program and for me does not turn out to create the project.
Specify please algorithm of creation of the project.

Thank you!

I would suggest that you try examples from c:\Keil\ARM\Boards\Keil\MCB2300\ and start from there.

Thank you. Works.
Does can you specify me as correct to create the projects?

http://www.keil.com/support/man/docs/gsac/

Then work through the example projects here: http://www.keil.com/support/man/docs/uv4/uv4_examples.htm

Should, of course, be: Read This !

Very helped thank you.
There was a next question.
That means a report:
MyPr.axf: Error: L6218E: Undefined symbol os_clock_interrupt (referred from rtx_conf_lpc23xx.o).
MyPr.axf: Error: L6218E: Undefined symbol os_mut_init (referred from rtx_conf_lpc23xx.o).
MyPr.axf: Error: L6218E: Undefined symbol os_mut_release (referred from rtx_conf_lpc23xx.o).
MyPr.axf: Error: L6218E: Undefined symbol os_mut_wait (referred from rtx_conf_lpc23xx.o).
MyPr.axf: Error: L6218E: Undefined symbol os_tsk_self (referred from rtx_conf_lpc23xx.o).

From him it is no go((((

Go to "options for target"->Target and select "RTX kernel" as "operating system".

Thank you. Began to work. Now when I pass to debugging or programming, a report shoots out :

1) Could not stop ARM device! Please check the JTAG cable.

2) Error: Flash Download failed - Target DLL has been cancelled.

That to do?