i am doing a project with gsm modem interfaced with ARM. and i my interface of gsm and muc is not working. i am using simcom gsm.and LPC2129/2368 microcontroller i am getting the GSM data through UART1 interrupt. please give me the connection details i.e. RS232 between the two and the UART1 settings
i am using SIMCOM_SIM300 gsm module where i have shorted 7 and 8 pin ie RTS and CTS.The other RS232 pins tx-rx and rx-tx and GND are connected accordignly. THE MODEM IS SUPPLIED WITH A 9-12V DC SUPPLY.
the GSM module dosn't have compatible voltage levels as the microcontroller