• State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 21 subscribers
  • Views 5989 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

USB IN Endpoint freeze after some time

Gaurav Jain

Hello Guys,

I am working on USB CDC application. I am using Windows XP and usbser.sys driver at host side.
I am trying to run a loopback in which host initiated a write of 64K to USB device over BULK OUT Endpoint and then read it back over BULK IN Endpoint. This loop should be able to run indefinitely.

Now the problem is after some time, HOST stops sending IN token to device. hence device stop sending data over IN Endpoint.
There is no ERR or STALL messages are being sent by either device. HOST just stops sending IN token to device.

I am not seeing this problem for small packet size like 512 bytes, 1K bytes. For these packet size loopback runs for a long time.

Kindly help me if anyone has any clue. I have read so many forum but didn't get the clue for this issue.
Any help is highly appreciated.

Regards,
Gaurav

Parents Reply Children
  • 0 in reply to Chinzei Tsuneo

    Hi Tsuneo,

    Thanks for your reply to the query.

    1) What is the RX buffer size on Windows CDC class driver?
    The size is set by SetupComm() (WinAPI) or SerialPort.ReadBufferSize (.NET).

    I have not used this function and settings are default only.

    2) Depending on Windows version (Win2K or older), you may need to insert ZLP (Zero-Length Packet) to bulk IN at every 4K bytes transfer.

    I am testing this on windows Xp and handling the received ZLP from Host to device. Also I am sending ZLP to host after completion of transfer. Just to add, ZLP handling is done only in case of transfer size equal to integral multiple of endpoint size.

    I think issue may be related to Rx buffer as you have mentioned.
    I have read your other posts and set Rx buffer as 65536 bytes using SetupComm. I ran the test case for 64K loopback, but it is still showing the same issue. Host stop sending IN packets to IN endpoint after some time.

    I am studying through this buffer usage.

    Please help me out.

    Best Regards,
    Gaurav

  • 0 in reply to Gaurav Jain

    Hmmm..
    Sound like bulk IN error case.

    Windows CDC driver, usbser.sys, silently stops bulk IN transactions on error.
    It doesn't do any error recovery, like reset_pipe.
    For the details, visit to this post

    CDC - stalled bulk IN
    www.microchip.com/.../m538194.aspx

    Noise on USB line is often the cause of this error.
    But this error is also caused when device drops bulk IN endpoint into disabled.

    If you see this trouble randomly, noise may be the culprit.
    But if it occurs regularly, disabled bulk IN EP may be the cause.

    Tsuneo

  • 0 in reply to Chinzei Tsuneo

    Hi Tsuneo,

    i am seeing that this issue is coming for every test case.
    I checked in the analyzer, only the expected packets are seen for the device. Does it means NO noise?

    How can I detect that device has disabled a specific IN endpoint? I checked, but this information is not provided in any USB registers.
    What could be the reason for device to disable the Bulk IN end points?

    Sorry for asking you too many questions. I am bit new to USB stuff.

    Thanks,
    Gaurav

  • 0 in reply to Gaurav Jain

    Hi Tsuneo,

    Is there any driver which I can use instead of Usbser.sys for USB CDC?

    Best Regards,
    Gaurav

  • 0 in reply to Gaurav Jain

    Maybe try it with Linux or with Mac OS?