• State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 22 subscribers
  • Views 2587 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Configure hall sensor on STM32_ini.c

Vitor Soares

Hi

So, I need help to configure TIM4 for hall sensors in BLDC.

Regards

Parents
  • 0 in reply to Andy Neil

    Sorry my mistake.

    the thing is, I have the configuration TIM4 like interfacing timer whit STM32 standart lib, but what I want is configure TIM4 for interfacing with 3 sensor of hall for motor controlling with STM32_ini.c

    exemple:

    TIM_ICInitStructure.TIM_Channel = TIM_Channel_1;

    TIM_ICInitStructure.TIM_ICPolarity = TIM_ICPolarity_Rising;

    TIM_ICInitStructure.TIM_ICSelection = TIM_ICSelection_TRC;

    TIM_ICInitStructure.TIM_ICPrescaler = TIM_ICPSC_DIV1;

    TIM_ICInitStructure.TIM_ICFilter = 0xF;

    TIM_ICInit(TIM4, &TIM_ICInitStructure);

    do this in STM32_ini.c

Reply
  • 0 in reply to Andy Neil

    Sorry my mistake.

    the thing is, I have the configuration TIM4 like interfacing timer whit STM32 standart lib, but what I want is configure TIM4 for interfacing with 3 sensor of hall for motor controlling with STM32_ini.c

    exemple:

    TIM_ICInitStructure.TIM_Channel = TIM_Channel_1;

    TIM_ICInitStructure.TIM_ICPolarity = TIM_ICPolarity_Rising;

    TIM_ICInitStructure.TIM_ICSelection = TIM_ICSelection_TRC;

    TIM_ICInitStructure.TIM_ICPrescaler = TIM_ICPSC_DIV1;

    TIM_ICInitStructure.TIM_ICFilter = 0xF;

    TIM_ICInit(TIM4, &TIM_ICInitStructure);

    do this in STM32_ini.c

Children
No data