We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
The NXP P89V51RD2 has the ability to choose either Timer1 or Timer2 as the baud rate generator for it's UART.
If I were to use the Timer 1 in mode 2 (auto reload), what is the relation between the baud rate and the crystal frequency in Normal and X2 modes?
I'm using the UART in mode 1(8 bit variable baud rate).
There is no formula in the data sheet you are right, i forgot NXP fortunately does not include "biblical" information in the datasheets.
use the formula in "the bible"
Erik
re 'fortunately'; a datasheet is sooooo much easier to use when it is not crowded with 'common stuff'
Just look at the SILabs 300+ page datasheets, you have to wade through tons of redundant stuff to miss what you need to find. 'miss' is not a typho
Is typho a typo?
If not, then what is a typho?
.... the fact that I am not a native English speaker does show through