We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
hi
i am trying to boot lpc3250 from emc (static memory cs0). using 2x16 parallel sst39lf800a. flash is programmed correctly (reading validation code 0x13579bd2 at 0xe0000000). but it is not booting. how to proceed further?
and i also had i doubt in my linker setting.
link.sct: --------
LR_ROM1 0xE0000000 0x00008000 { ; load region size_region ER_ROM1 0xE0000000 0x00008000 { ; load address = execution address *.o (RESET, +First) *(InRoot$$Sections) .ANY (+RO) } RW_IRAM1 0x08000000 0x00040000 { ; RW data .ANY (+RW +ZI) } }
is this correct?
i am not demanding . may be the way of asking question is looks like demand. thank u.
am not demanding .
Oh yes, you are. You may not have intended to (although your reaction elsewhere in this discussion rather suggests otherwise), but you are.
may be the way of asking question is looks like demand.
You were not asking a question. You wrote this:
Give some solution
No question mark, no "please", no nothing. All there is is a statement written in the imperative. Yes, that means it's a demand.
The only ever so slightly redeeming aspect of yours is that you refrained from decorating it with the increasingly common truckload of "!" that youngsters these says seem to believe is correct spelling.
If you really want people to tolerate being talked to like that, get ready to pay for that privilege. The consultants' data base is just a couple clicks away.