My project is finished (for the present)
This is a new Moving Message Display with a LPC2138 and 8(16) x 5x7 led matrix, working.
It uses a new and fast algorithm, written in C.
It is modular: it uses one or two same 8 char display unit(s).
Online commands (via rs232, in Virtual Terminal)
- scrolling by pixel or by character or by graphic - pause/continue scrolling - on/off one pixel gap between fonts - home function (back to the begin) - max. 127 chars displayable text - - - stored in the memory - scrolling speed up/down - single step left/right - ASCII char test - multi language characters (also full American) - default settings via switches - get/store settings from/to memory
Latest addition
- - - last typed char is deletable (backspace function), this was very difficult to code.
I'm going to attach here the two projects (for 8 and 16 chars) with the hex firmware only, beacuse I wrote the program in C but with many (70%) hard and hand optimalisation in C (for the speed). It is not a human readable program, sorry...
Please study also my next posts at this thread if you want to build this!
Try it!
About the source look at my next posts here!
The ARCC Manual is unhelpful on the subject:
"Using the ARM compiler, you can declare any number of local objects to have the storage class register." www.keil.com/.../armccref_chddfaec.htm
That cannot be all it says about register. The compiler documentation is required (by the C standard, C99 6.7.1 paragrahp 4) to specify the "extent of effectivenes" in its documentation. "Implementation-defined" means the implementation is required to define it, in the documentation.
That is the entire content of the Home » Standard C Implementation Definition » Implementation definition » Registers section of the RealView Compiler Reference Guide
"The compiler documentation is required to specify the 'extent of effectivenes' in its documentation"
The difficulty of finding anything in the Keil/ARM documentation has been noted on several occasions...
:-(
Some you said is correct and some is incorrect.
You will learn much from the code.
Soon.