Keil forum About SBUF

State Not Answered
Locked Locked
Replies 17 replies
Subscribers 22 subscribers
Views 3066 views
Users 0 members are here

Options

Related

How was your experience today?

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

About SBUF

gunes bayir over 14 years ago

Hi, in a serial communication program, do I have to "SETB P3.0" in order to receive from the serial port ??

Parents

0 Andy Neil over 14 years ago in reply to ²erik malund

and some chips have more than 1 UART - so "the UART" is meaningless!

and more modern chips often have more things that need to be configured; eg, www.8052.com/.../182918

So, again, it really is important to state exactly what chip you are using!
Cancel
Vote up 0 Vote down

Cancel

Reply

0 Andy Neil over 14 years ago in reply to ²erik malund

and some chips have more than 1 UART - so "the UART" is meaningless!

and more modern chips often have more things that need to be configured; eg, www.8052.com/.../182918

So, again, it really is important to state exactly what chip you are using!
Cancel
Vote up 0 Vote down

Cancel

Children

No data