• State Not Answered
  • Locked Locked
  • Replies 13 replies
  • Subscribers 22 subscribers
  • Views 2081 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to setup uVision4 project for MCB2929 EVB

Dragan

Respected colleagues,

can anybody please post a sample on how to configure a uVision4 project for use of an external SRAM for data storage on the Keil MCB2929 evaluation board? Do I have to configure a Static Memory Controller (SMC) (and how?), or is it sufficient to configure Memory Areas in the Device Target Options?

Thanks in advance.

With best regards,
Dragan Kujovic

Parents
  • 0 in reply to Per Westermark

    As you said, this was analogy. But, at the bottom line, it seems that nobody on this forum doesn't know how to use external SRAM on MCB2929 EVB. Maybe, even the Keil programmers haven't tested the external SRAM on their own evaluation board.

    Am I right, or am I right?

    With best regards,
    Dragan Kujovic

Reply
  • 0 in reply to Per Westermark

    As you said, this was analogy. But, at the bottom line, it seems that nobody on this forum doesn't know how to use external SRAM on MCB2929 EVB. Maybe, even the Keil programmers haven't tested the external SRAM on their own evaluation board.

    Am I right, or am I right?

    With best regards,
    Dragan Kujovic

Children
No data