This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Warning 500: MISSING DEVICE (DRIVER NOT INSTALLED)

Hello together,

I have a problem with my dongle.
I have new PC and there is no printer port any more, so I can't put in the sentinel.
So I used an USB to parallel cable to insert our dongle, after that I installed the Sentinel Protection Installer V7 and executed the program.
After that I also got the same error message as before.
When I configure the sentinel about SetupSysDriver.exe, I have no chance to configure it, because there were two options ISA and USB and no change has influence on the error in µVision.
So does anyone has an idea to solve the problem?

Thanks

Thommy

Parents
  • "LPT dongles are the worst of the worst, since they are relying on ancient hardware"

    Not only are they relying on ancient hardware, they are also relying on using it to a purpose for which it was never designed - which is why the USB-to-LPT adaptors are useless here.

    Back in the Triscend days, their JTAG adaptor (among others) also used the LPT port.
    Although the Keil dongle was supposed to provide a pass-though for other devices on the LPT pot, it didn't work - and we had to come to a "special arrangement" with Keil to be able to debug Triscend!

    "Quite frankly, any type of copy protection will guarantee large costs for the buyer by reducing their ability to use the license they have payed for"

    Indeed - and often it's more cost to the bona fide user than to the hacker!

    But software "node-locking" and "licence manager" solutions are no better - they cause just as much grief as hardware dongles.

    In fact, I would prefer a hardware key - it makes it really simple to just install the software on every PC, and only allow the appropriate number of concurrent uses.

Reply
  • "LPT dongles are the worst of the worst, since they are relying on ancient hardware"

    Not only are they relying on ancient hardware, they are also relying on using it to a purpose for which it was never designed - which is why the USB-to-LPT adaptors are useless here.

    Back in the Triscend days, their JTAG adaptor (among others) also used the LPT port.
    Although the Keil dongle was supposed to provide a pass-though for other devices on the LPT pot, it didn't work - and we had to come to a "special arrangement" with Keil to be able to debug Triscend!

    "Quite frankly, any type of copy protection will guarantee large costs for the buyer by reducing their ability to use the license they have payed for"

    Indeed - and often it's more cost to the bona fide user than to the hacker!

    But software "node-locking" and "licence manager" solutions are no better - they cause just as much grief as hardware dongles.

    In fact, I would prefer a hardware key - it makes it really simple to just install the software on every PC, and only allow the appropriate number of concurrent uses.

Children
No data